Username   Password       Forgot your password?  Forgot your username? 

Fault Diagnosis for Machinery based on Feature Selection and Probabilistic Neural Network

Volume 13, Number 7, November 2017 - Paper 20  - pp. 1165-1170
DOI: 10.23940/ijpe.17.07.p20.11651170

Haiping Li*, Jianmin Zhao, Xinghui Zhang, Xianglong Ni

Mechanical Engineering College, Shijiazhuang, 050003, China

(Submitted on May 31, 2017; Revised on October 10, 2017; Accepted on October 18, 2017)



Abstract:

Fault diagnosis for the maintenance of machinery is more difficult since it becomes more precise, automatic and efficient. To tackle this problem, a feature selection and probabilistic neural network-based method is presented in this paper. Firstly, feature parameters are extracted and selected after obtaining the raw signal. Then, the selected feature parameters are preprocessed according to the faulted characteristic frequencies of components. Finally, the diagnosis results are outputted with the decision method of PNN. Experimental data is utilized to demonstrate the effectiveness of this methodology.

 

References: 13

        1. Y. Chen, “Study on BSS Algorithm used on Fault Diagnosis of Gearbox,” TELKOMNIKA Indonesian Journal of Electrical Engineering, vol. 11, no. 6, pp. 2942-2947, 2013.
        2. X. F. Fan and M. J. Zuo,“Gearbox fault detection using Hilbert and wavelet packet transform,” Mechanical Systems and Signal Processing, vol. 20, no. 4, pp. 966-982, 2006.
        3. A. K. Jalan and A. R. Mohanty, “Model based fault diagnosis in rotating machinery,” International Journal of Performability Engineering, vol. 7, no. 6, pp. 515-523, 2011.
        4. Y. H. Jiang, B. P. Tang, Y. Qin and W. Y. Liu, “Feature extraction method of wind turbine based on adaptive Morlet wavelet and SVD,” Renewable Energy, vol. 36, no. 8, pp. 2146-2153, 2011.
        5. H. P. Li, J. M. Zhao, J. Liu and X. L. Ni, “Application of Empirical Mode Decomposition and Euclidean Distance Technique for Feature Selection and Fault Diagnosis of Planetary Gearbox,” Journal of Vibroengineering, vol. 18, no. 8, pp. 5096-5113, 2016.
        6. J. S. Kang and X. H. Zhang, “Application of Hidden Markov Models in machine fault diagnosis,” Information-An International Interdisciplinary Journal, vol. 15, no. 12B, pp. 5829-5838, 2012.
        7. K. Kumar, “Knowledge Extraction From Trained Neural Network,” TELKOMNIKA Indonesian Journal of Electrical Engineering, vol. 1, no. 4, pp. 282-293, 2012.
        8. Y. G. Lei and M. J. Zuo, “Gear crack level identification based on weighted K nearest neighbor classification algorithm,” Mechanical Systems and Signal Processing, vol. 23, no. 5, pp. 1535-1547, 2009.
        9. S. R. Mohanty, P.K. Ray and N. Kishor, “Classification of disturbances in hybrid DG system using modular PNN and SVM,” ELSEVIER Electrical Power and Energy Systems, vol. 44, pp. 764-777, 2013.
        10. D. H. Qiu, Y. Chen and Y. Li, “Adaptive RBF neural networks sliding mode control for a DEAP linear actuator,” International Journal of Performability Engineering, vol. 13, no. 4, pp. 400-408, July 2017.
        11. Z. Y. Su, Y. M. Zhang, M. P. Jia, F. Y. Xu and J. Z. Hu, “Gear fault identification and classification of singular value decomposition based on Hilbert-Huang transform,” Mechanical Science and Technology, vol. 25, no. 2, pp. 267-272, 2011.
        12. X. L. Tang, L. Zhuang, J. Cai and C. B. Li, “Multi-fault classification based on support vector machine trained by chaos particle swarm optimization,” Knowledge-Based Systems, vol. 23, pp. 486-490, 2010.
        13. J. D. Wu, “Fault gear identification and classification using discrete wavelet transform and adaptive neuron-fuzzy inference,” Expert Systems with Applications, vol. 36, no. 3, pp. 6244-6255, 2009.

               

              Please note : You will need Adobe Acrobat viewer to view the full articles.Get Free Adobe Reader

               
              This site uses encryption for transmitting your passwords. ratmilwebsolutions.com