|
R. J. E. Dyson and D. L. Doel, “CF-80 Condition Monitoring – The Engine Manufacturing’s Involvement in Data Acquisition and Analysis”, AIAA-84-1412, 1987.
|
|
E. L. Gatto, Y. G. Li and P. Pilidis, “Gas turbine off-design performance adaptation using a genetic algorithm,” ASME Turbo Expo 2010: Power for Land, Sea, and Air, vol. 3, pp. 521-532, Glasgow, United kingdom, June, 2010.
|
|
M. F. A. Ghafir, Y. G. Li and L. Wang, “Creep Life Prediction for Aero Gas Turbine Hot Section Component Using Artificial Neural Networks,” Journal of Engineering for Gas Turbines and Power, vol. 136, no. 3, pp. 1-9, 2014.
|
|
A. Gulati, M. Zedda, and R. Singh, “Gas Turbine Engine and Sensor Multiple Operating Point Analysis Using Optimization Techniques,” 36th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, pp. 3716, Huntsville, AL, United states, July, 2000.
|
|
E. Larsson, J. Aslund, E. Frisk and L. Eriksson, “Gas turbine modeling for diagnosis and control,” Journal of Engineering for Gas Turbines and Power, vol. 136, no. 1, pp.1-8, 2014.
|
|
Y. G. Li, “A Genetic Algorithm Approach to Estimate Performance Status of Gas Turbines,” ASME Turbo Expo 2008: Power for Land, Sea, and Air. American Society of Mechanical Engineers, vol.2, pp. 431-440, Berlin, Germany, June, 2008.
|
|
Y. G. Li, “Gas turbine performance and health status estimation using adaptive gas path analysis,” Journal of engineering for gas turbines and power, vol. 132, no.4, pp. 1-9, 2010.
|
|
Y. Liu, M. Su. “Nonlinear Model Based Diagnostic of Gas Turbine Faults: A Case Study,” ASME 2011 Turbo Expo: Turbine Technical Conference and Exposition. American Society of Mechanical Engineers, vol. 3, pp. 1-8, Vancouver, BC, Canada, June, 2011.
|
|
X. Pu, S. Liu and H. Jiang, “Sparse Bayesian Learning for Gas Path Diagnostics,” Journal of Engineering for Gas Turbines and Power, vol. 135, no.7, pp.1-8, 2013.
|
|
F. Sahin and M. C. Yavuz, “Fault diagnosis for airplane engines using Bayesian networks and distributed particle swarm optimization,” Parallel Computing, vol. 33, no.2, pp. 124-143, 2007.
|
|
A. Salar, A. K. Sedigh and S. M. Hosseini, “A Hybrid EKF-Fuzzy Approach to Fault Detection and Isolation of Industrial Gas Turbines,” ASME 2011 Turbo Expo: Turbine Technical Conference and Exposition. American Society of Mechanical Engineers, pp. 251-260, Vancouver, BC, Canada, June 2011.
|
|
D. L. Simon, J. B. Armstrong, “An integrated approach for aircraft engine performance estimation and fault diagnostics,” Journal of Engineering for Gas Turbines and Power, vol. 135, no. 7, pp. 1-8, 2013.
|
|
L. A. Urban, “Gas Path Analysis Applied to Turbine Engine Condition Monitoring,” J. Aircraft, vol. 10, no. 7, pp. 400-403, 1972.
|
|
L. Wang, Y. G. Li, M. F. Ghafir, “A Rough Set Diagnostic Frameworks for Gas Turbine Fault Classification,” ASME Turbo Expo: Turbine Technical Conference and Exposition, pp. 1-6, San Antonio, June, 2013.
|
|
Y. L. Ying, Y. P. Cao and S. Y. Li, “Research on fuel supply rate of marine intercooled–cycle engine based on simulation experiment,” International Journal of Computer Applications in Technology, vol. 48, no. 3, pp. 212-221, 2013.
|
|
Y. L. Ying, Y. P. Cao and S. Y. Li, “Study on flow parameters optimisation for marine gas turbine intercooler system based on simulation experiment,” International Journal of Computer Applications in Technology, vol. 47, no. 1, pp. 57-67, 2013.
|
|
M. Zedda and R. Singh, “Gas Turbine Engine and Sensor Fault Diagnosis Using Optimization Techniques”, AIAA Journal of Propulsion & Power, Vol.18, No.5, pp.1019-1026, 2002.
|