[1] |
B. Zhu, G. Chen, K. Liu , “Typhoon-Resistant Ultimate Bearing Capacity of Deep-Water Jacket Platforms,” Acta Pertrolei Sinica, Vol. 35, No. 1, pp. 152-158, January 2014
|
[2] |
Q. Meng, Z. Sun, D. Zhou , “Contact Finite Element Analysis of the Pressing Block Tooth in Underwater Skirt Pile Gripper of Offshore Oil Platform,” Machinery, Vol. 33, No. 12, pp. 1-4, December 2006
|
[3] |
Z. Sun, Q. Meng, D. Zhou , “Structure Optimization of the Pressing Block Tooth in Underwater Skirt Pile Gripper of Offshore Oil Platform,” Machine Design & Research, Vol. 22, No. 6, pp. 102-105, December 2006
doi: 10.1109/SIPS.2006.352550
|
[4] |
F. Liang, X. Yan, W. Zhang , “Mechanical Analysis of Jacket Pile Gripper and Choice of the Number of Hydraulic Pressure Vats,” The Ocean Engineering, Vol. 25, No. 1, pp. 82-87, February 2007
doi: 10.1016/S1001-6058(07)60030-4
|
[5] |
P. Jiang , “Mechanical Analysis on Underwater Leveling-Gripping System of Jacket and Experimental Research,” Harbin Engineering University, Harbin, October 2012
|
[6] |
P. Jiang and X. Fang , “Analysis and Experimental Study on the Grip Function of an Underwater Skirt Pile Gripper,” Journal of Harbin Engineering University, Vol. 32, No. 9, pp. 1228-1232, September 2011
doi: 10.3969/j.issn.1007-7043.2011.09.023
|
[7] |
H. Wang, L. Zhang, Q. Meng , “Analysis of Ocean Pile Platform Leveler Clamping Working Mechanism,” Machine Tool and Hydraulics, Vol. 45, No. 9, pp. 76-79, September 2017
|
[8] |
Z. Sun, Q. Meng, J. Wu , “Check Ring Joint Structure Design in Underwater Skirt Pile Gripper based on Body Contact Nonlinear Finite Element Analysis,” Journal of Engineering Design, Vol. 14, No. 2, pp. 117-120, 12, April 2007
doi: 10.1016/S1872-2040(07)60059-0
|
[9] |
Z. Sun, Q. Meng, L. Wang , “Structure Optimization Design of Hydraulic Cylinder of Underwater Skirt Pile Gripper of Offshore Oil Platform,” Petroleum Engineering Construction, Vol. 33, No. 1, pp. 27-30, 5, February 2007
doi: 10.1081/MB-100107566
|
[10] |
A. Shukla and H. Karki , “Application of Robotics in Offshore Oil and Gas Industry-A Review PartⅡ,” Robotics and Auto Nous Systems, Vol. 75, Part B, pp. 508-524, January 2016
doi: 10.1016/j.robot.2015.09.013
|
[11] |
R. Li, J. Ding, P. Cao , “Optimization Design of Pressing Machine Frame by ANASYS Workbench Software,” Journal of Northeast Forestry University, Vol.45, No. 12, pp. 62-66, December 2017
|
[12] |
M. Zhou, L. Zhang, Y. Chen, M. Liu , “Structural Optimization for Rack of Boat-Type Tractor based on Sensitivity Analysis,” Transactions of the Chinese Society of Agricultural Engineering, Vol. 32, No. 12, pp. 54-60, June 2016
doi: 10.11975/j.issn.1002-6819.2016.12.008
|
[13] |
P. E. Uys, P. S. Els, M. Thoresson , “Suspension Setting for Optimal Ride Comfort of Off-Road Vehicles Travelling on Roads with Different Roughnessand Speeds,” Journal ofTerramechanics, Vol.44,No. 2, pp. 163-175, 2007
doi: 10.1016/j.jterra.2006.05.002
|
[14] |
S. Wang, A. Wu, B. Han , “Fuzzy Matter-Element Evaluation of Ore-Rock Capability in Block Caving Method,” Chinese Journal of Rock Mechanics and Engineering, Vol.33, No. 6, pp. 1241-1247, June 2014
|