[1] |
C.J. Su and T. T. Li , “New Process Law of AZ31B Magnesium Alloy Axisymmetric Parts Single -Point Die Free Thermal Incremental Forming,” Materials and Engineering of Rare Metals, Vol. 444, No. 3, pp. 649-655, March 2015
|
[2] |
L. D. Napoli, L. Filice, G. Ambrogio , “A Simple Approach for Reducing Profile Diverting in a Single Point Incremental Forming Process,” Proceeding of the Institute of Mechanical Engineers, Part B. Journal of Engineering Manufacture, Vol. 219, No. 11, pp. 823-830, November 2005
|
[3] |
G. Hussain, L. Gao, N. U. Dar , “An Experimental Study on Some Formability Evaluation Methods in Negative Incremental Forming,” Journal of Materials Processing Technology, Vol. 186, No. 3, pp. 45-53, March 2007
|
[4] |
Z. Cui, L. Gao, Y. Xu , “Analysis of Convex Issue in NC Incremental Forming,” Mechanical Science and Technology, No. 12, pp. 1581-1585, December 2008
|
[5] |
X. F. Shi, Y. Xu, L. Gao , “Investigation on Error Compensatory Process of Pyramidal Parts Formed by Single Point Incremental Forming,” China Mechanical Engineering, Vol. 23, No. 18, pp. 2248-2252, November 2013
|
[6] |
C. Oana, B. Plunkett, F. Barlat , “Orthotropic Yield Criterion for Hexagonal Closed Packed Metals,” International Journal of Plasticity, Vol. 22, No. 7, pp. 1171-1194, July 2006
|
[7] |
Z. B. Wu, Z. L. J. Gui, and J. Fan , “Mechanical Properties and Constitutive Analysis of AZ31B Magnesium Alloy Extrusion Material,” Chinese Journal of Nonferrous Metals, Vol. 22, No. 2, pp. 293-300, February 2015
|
[8] |
P. T. Shi, Y. Li, M. S. Yang , “On Magnesium Alloy Sheet Heated in Liquid Medium Hot Progressive Forming Limits,” Mechanical Strength, Vol. 47, No. 2, pp. 412-417, February 2018
|
[9] |
P. T. Shi, Y. Li, M. S. Yang , “Research on Thermal Incremental Forming Springback of Liquid Medium Heated Magnesium Alloy,” Hot Working Technology, Vol. 45, No. 19, pp. 135-139, October 2016
|
[10] |
P. Zhou, E. Beeh, H. E. Friedrich , “Mechanical Behavior and Microstructural Analysis of Extruded AZ31B Magnesium Alloy Processed by Backward Extrusion,” Journal of Materials Engineering & Performance, Vol. 25, No. 7, pp. 293-300, July 2015
|