Collaboration System Design of the Transportation Platform

doi:10.23940/ijpe.19.03.p28.987997

Abstract

Abstract: In order to reduce the labor intensity of workers in automatic production lines handling material, an Automated Guided Vehicle collaboration system (AGV) is designed in this paper. On the basis of analyzing the differential steering principle, the control strategy of the AGV tracking and the automatic tracking control are designed based on the fuzzy algorithm and PID algorithm respectively, so as to realize the control of PC for the transport of goods. Additionally, the PC control software is specially designed for the system. This system is tested on the simulation and experiment environment and the results show that the AGV has the advantages of high guidance precision, following stability and high reliability. The fleet operation can effectively improve the work efficiency and reduce labor costs.

Key words: AGV, fuzzy control, PID control, remote control, AGV scheduling

Zhongwen Wang, Dong Liang, Ruizhen Duan, and Mingshan Chi. Collaboration System Design of the Transportation Platform [J]. Int J Performability Eng, 2019, 15(3): 987-997.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

References

1. H. Xu, Q. Liu, F. Che, and M. Yuan, “Application of Transfer AGV in Materials Transportation System,” Logistics Sci-Tech, No. 6, pp. 80-82, 2013
2. Q. P. Wu, Y. P. Jin, P. Ren,Z. Y. Zha, “Present Situation and Developing Trend of AGV Key Technology,” Manufacturing Automation, Vol. 35, No.5, pp. 106-109+121, 2013
3. J. H.Zhang and Q. S. Gao, “Complicated Logistics System Engineering,” Journal of Qingdao University, Vol. 15, No. 2, pp. 75-77, 2002
4. Q. Fan, “Panning and Designing of Automotive Manufacturing Corporation's Distribution Center,” Shang Hai Jiao Tong University, pp. 1-5, 2008
5. J. R.Zhang and Y. Ge, “Design of Small-Scare Automatic Handling System,”Industry and Mine Automation, No. 5, pp. 105-106, 2012
6. Z. Huang, “Research on the AGV Technology based on PLC Control and its Application,” East China University of Science and Technology, pp. 4-8, 2013
7. C. B. X.Zhang and Z. Q. Huang, “Evolution Summarization of Automated Guided Vehicles (AGV),”Manufacture Information Engineering of China, No. 1, pp. 53-59, 2010
8. Y. Y.Zhang and G. Q. Wang, “Analysis on Influence of Material Handling System in Military Logistics,”Department of Material Handling Machineries, Military Traffic Institute, No. 3, pp. 78-79, 2005
9. C. L. Wang, N. Yuan,X. L. Wang, “Design of the Materials Loading and Handing System at Distribution Centers,”Logistics Sci-Tech, No. 5, pp. 67-68, 2011
10. M. S.Jie and W. H. Choi, “Type-2 Fuzzy PID Controller Design for Mobile Robot,” International Journal of Control and Automation, Vol. 9, No. 11, pp. 203-214, 2016
11. X. Q. Lian, “Fuzzy Control Technology,” China Electric Power Press, pp. 38-42, Beijing, 2003
12. Z. Y. Wang, Y. D. Zhan,L. M. Zhang, “Fuzzy Control of Two-Wheel Difference Speed Steering in Automated Guided Vehicles based on Vision Computer Applications,”Computer Applications, No. 7, pp. 1789-1791, 2007
13. Z. Y. Zhang, J. F. Zhang, L. W. Huang,C. Y. Li, “Trajectory Tracking Fuzzy Control Algorithm for Picking Robot Arm,” International Journal of Control and Automation, Vol. 7, No. 9, pp. 411-422, 2014
14. J. Duan, “Research on Intelligent PID Control Theory and Technique of Digital Electronic Governing System of Locomotive Diesel Engine,” Dalian University of Technology, pp. 1-7, 2000
15. Y. H.Lee and H. S. Kim, “Digital Controller Design to Control the Direct Current Motor System,” International Journal of Control and Automation, Vol. 7, No. 9, pp. 283-288, 2014
16. A. Husain and R. Abha, “A Hybrid of Sliding Mode Control and Fuzzy Gain Scheduling PID Control using Fuzzy Supervisory Switched System for DC Motor Speed Control System,” International Journal of Grid and Distributed Computing, Vol. 9, No. 5, pp. 41-54, 2016
17. Y. Zuo, “Research on the Techniques in Industrial Wireless Mesh Networks,” East China University of Science and Technology, pp. 17-39, 2013
18. J. T.Cui and H. Li, “The Remote Data Monitoring Design based on Wireless Sensor Network,” International Journal of Future Generation Communication and Networking, Vol. 9, No. 8, pp. 1-8, 2016
19. W. J. Dong, L. H. Li, W. Y. Guo,H. G. Tang, “Design of the Granary Temperature and Humidity Monitoring System based on Zigbee,”Journal of Harbin University of Science and Technology, No. 19, pp. 121-123, 2014
20. Y. Lin, X. Zhu, Z. Zheng, et al., “The Individual Identification Method of Wireless Device based on Dimensionality Reduction and Machine Learning,”Journal of Supercomputing, No. 5, pp. 1-18, 2017
21. Y. Lin, C. Wang, J. X. Wang,Z. Dou, “A Novel Dynamic Spectrum Access Framework based on Reinforcement Learning for Cognitive Radio Sensor Networks,” Sensors, Vol. 16, No. 10, pp. 1-22, 2016
22. Y. Lin, C. Wang, C. Ma, et al., “A New Combination Method for Multisensor Conflict Information,” Journal of Supercomputing, Vol. 72, No. 7, pp. 2874-2890, 2016
23. Q. Wu, Y. Li,Y. Lin, “The Application of Nonlocal Total Variation in Image Denoising for Mobile Transmission,” Multimedia Tools & Applications, Vol. 76, No. 16, pp. 1-13, 2016
24. C. Shi, Z. Dou, Y. Lin, et al., “Dynamic Threshold-Setting for RF-Powered Cognitive Radio Networks in Non-Gaussian Noise,” Physical Communication, Vol. 27, No. 4, pp. 99-105, 2018

[1]	Jingyuan Liu, Xu Yang, Jingang Guo, Da Wang, and Hai Zhao. Monitoring Technology of Energy Storage Power Stations based on Discharge Control Scheduling Algorithm [J]. Int J Performability Eng, 2021, 17(1): 95-102.
[2]	Zhihui Zhuang, Jian Cen, and Shuai Liu. Control Method of Multi-Split Wireless Remote Monitoring System [J]. Int J Performability Eng, 2019, 15(12): 3279-3286.