[1] C. He and D. Li, “Research on Reliability of Gyro Motors,”Aerospace Control (in Chinese), pp. 74-81, 2002 [2] S. Zhang, J. Shi,J. Wang, “Satellite on-Board Failure Statistics and Analysis,” Spacecraft Engineering (in Chinese), Vol. 19, No. 8, pp. 41-46, 2010 [3] R. R. Burt, R. W. Loffi,T. B. Company, “Failure Analysis of International Space Station Control Moment Gyro,” inProceedings of the 10th European Space Mechanisms & Tribology Symposium, pp. 13-25, San Sebastian, Spain, September 2003 [4] K. Sathyan, K. Gopinath, S. H. Lee,H. Y. Hsu, “Bearing Retainer Designs and Retainer Instability Failures in Spacecraft Moving Mechanical Systems,” Tribology Transactions, Vol. 55, No. 4, pp. 503-511, 2015 [5] A. B. Jones, “Ball Motion and Sliding Friction in Ball Bearings,”Journal of Basic Engineering, 1959 [6] T. A.Harris and M. N. Kotzalas, “Rolling Bearing Analysis: Advanced Concepts of Bearing Technology,” 5th Edition, CRC Press, Boca Raton, 2006 [7] P. K. Gupta, “Advanced Dynamics of Rolling Elements,” Springer, Vienna, 1984 [8] X. Ai and H. Cheng, “The Effects of Surface Texture on EHL Point Contacts,” Journal of Tribology, Vol. 118, No. 1, pp. 59-66, 2008 [9] X. Ai and H. Cheng, “The Influence of Moving Dent on Point EHL Contacts,” Tribology Transactions, Vol. 37, No. 2, pp. 323-335, 2008 [10] G. Xu and F. Sadeghi, “Thermal EHL Analysis of Circular Contacts with Measured Surface Roughness,” Journal of Tribology, Vol. 118, No. 3, pp. 473-482, 2008 [11] D. Zhu and X. Ai, “Point Contact EHL based on Optically Measured Three-Dimensional Rough Surfaces,” Journal of Tribology, Vol. 119, No. 3, pp. 375-384, 2008 [12] X. F. Jiang, D. Y. Hua, H. S. Cheng, X. L. Ai,S. C. Lee, “A Mixed Elastohydrodynamic Lubrication Model with Asperity Contact,” Journal of Tribology, Vol. 121, No. 3, pp. 481-491, 2008 [13] Y. Z.Hu and D. Zhu, “A Full Numerical Solution to the Mixed Lubrication in Point Contacts,” Journal of Tribology, Vol. 122, No. 1, pp. 1-9, 2008 [14] M. J. A.Holmes, H. P. Evans, T. G. Hughes, and R. W. Snidle, “Transient Elastohydrodynamic Point Contact Analysis using a New Coupled Differential Deflection Method Part 1: Theory and Validation,” inProceedings of the Institution of Mechanical Engineers, pp. 333-365, 2003 [15] D. Zhu, “Effect of Surface Roughness on Mixed EHD Lubrication Characteristics,” Tribology Transactions, Vol. 46, No. 1, pp. 44-48, 2008 [16] F. Sahlin, R. Larsson, A. Almqvist, P. Lugt,P. Marklund, “A Mixed Lubrication Model Incorporating Measured Surface Topography, Part 1: Theory of Flow Factor,”ARCHIVE Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology, DOI: 10.1243/13506501JET658, Oct. 25, 2009 [17] F. Sahlin, R. Larsson, A. Almqvist,P. Lugt, “A Mixed Lubrication Model Incorporating Measured Surface Topography, Part 2: Roughness Treatment, Model Validation, and Simulation,” ARCHIVE Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology, Vol. 224, No. 4, pp. 353-365, 2009 [18] P. Yang and S. Wen, “A Generalized Reynolds Equation for Non-Newtonian Thermal Elastohydrodynamio Lubrication,” Journal of Tribology, Vol. 112, No. 4, pp. 631-636, 2008 [19] N. Ren, D. Zhu,W. Chen, “A Three-Dimensional Deterministic Model for Rough Surface Line-Contact EHL Problems,” Journal of Tribology, Vol. 131, No. 1, pp. 011501-011509, 2008 [20] X. Ai, “Numerical Analyses of Elastohydrodynamically Lubricated Line and Point Contacts with Rough Surfaces by using Semi-System and Multigrid Methods,” Evanston, Northwestern University, 1993 |