Failure Analysis of Acrylonitrile Butadiene Styrene (ABS) Materials and Damage Modeling by Fracture

doi:10.23940/ijpe.19.09.p1.22852293

Abstract

Abstract: Polymer materials are distinguished by their simple and economical for-matting, versatility, lightness, and chemical stability. Despite their widespread use both in everyday life and in advanced technologies, these materials are generally still very poorly understood in regards to its chemical, physical and environmental, rheological and mechanical properties. The purpose of this study is to determine the notch effect on the mechanical behavior of Acrylonitrile Butadiene Styrene (ABS), which we carried out tensile tests on ABS rectangular test pieces for different backgrounds. The notch ranges from 1 mm to 18 mm. Subsequently we have based an approach, which consists in following the evolution of static damage as a function of the fraction of life test pieces notched, to know the critical fraction of life and which corresponds to a critical notch radius, which can be authorized. Second, we calculated the stress concentration factor by two methods to determine the critical stress concentration that usually precedes the sudden failure of a component. Finally, we will relate the damage factor Ds to the stress concentration factor through the fraction of life by using a nonlinear correlation, which makes it possible to predict the instant of acceleration of damage for a preventive maintenance.

Key words: polymer, ABS, mechanical properties, stress concentration factor, damage

Fatima Sabah, Achraf Wahid, Abdelkarim Kartouni, Hamid Chakir, and Mohamed ELghorba. Failure Analysis of Acrylonitrile Butadiene Styrene (ABS) Materials and Damage Modeling by Fracture [J]. Int J Performability Eng, 2019, 15(9): 2285-2293.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

References

1. B. Ni, J. Li,V. Berry, “Plastic Zone in Front of a Mode i Crack in Acrylonitrile-Butadiene-Styrene Polymers,” Polymer, Vol. 32, No.15, pp. 2766, 1991
2. Ouardi, F. Majid, N. Mouhib, and M. Elghorba, “Residual Life Prediction of Defected Polypropylene Random Copolymer pipes (PPR),” Frattura ed Integrità Strutturale, Vol. 12, No. 43, pp. 97-105, 2018
3. G. Arid, I. Makadir, A. Naji, M. Chergui,M. ElGhorba, “Comparative Study of the Mechanical Behavior of Polymer Materials Between ABS and PVC,” The International Journal of Engineering and Sciences, Vol. 4, No. 4, pp. 55-60, 2015
4. H. Essabir, R. Bouhfid,A. el Kacem Qaiss, “Fracture Surface Morphologies in Understanding of Composite Structural Behavior,” Structural Health Monitoring of Biocomposites, Fibre-Reinforced Composites and Hybrid Composites, pp. 277, Elsevier, 2019
5. D. Ghosh and D. Khastgir, “Degradation and Stability of Polymeric High-Voltage Insulators and Prediction of Their Service Life Through Environmental and 14 Accelerated Aging Processes,” ACS Omega, Vol. 3, No. 9, pp. 11317, 2018
6. F. Carrasco, O. Santana, J. Cailloux, M. Sanchez-Soto,M. L. Maspoch, “Poly (Lactic Acid) and Acrylonitrile- Butadiene-Styrene Blends: Inuence of Adding ABS-g-MAH Compatibilizer on the Kinetics of the Thermal Degradation,” Polymer Testing, Vol. 67, pp. 468, 2018
7. G. Gu, Y. Xia, C. -H. Lin, S. Lin, Y. Meng, and Q. Zhou, “Experimental Study on Characterizing Damage Behavior of Thermoplastics,” Materials and Design, Vol. 44, pp. 199, 2013
8. M. R. Satapathy, B. Vinayak, K. Jayaprakash,N. Naik, “Fatigue Behavior of Laminated Composites with a Circular Hole under in-Plane Multiaxial Loading,” Materials and Design, Vol. 51, pp. 347, 2013
9.D. -J. Liaw, B. -Y. Liaw, and C. -M. Yang, “Synthesis and Properties of New Polyamides based on Bis [4-(4-Aminophenoxy) Phenyl] Diphenylmethane,” Macromolecules, Vol. 32, No. 21, pp. 7248, 1999
10. H. Farid, K. Elhad, M. Elghorba, F. Erchiqui,M. Chergui, “Damage Characterization of a Thin Plate Made of ABS under Uniaxial Solicitation,” International Journal of Engineering and Science, Vol. 2, No. 8, pp. 11-17, 2013
11. ASTM D638-14, Standard Test Method for Tensile Properties of Plastics, ASTM International, 2015
12. ASTM D882-12, Standard Test Method for Tensile Properties of Thin Plastic Sheeting, ASTM International, 2012
13. ASTMd5766/d5766m-07-standard test method for open hole tensile strength of polymer matrix composite laminates ,2007
14. R. M. OHiggins, M. A.McCarthy, and C. T. McCarthy, “Comparison of Open Hole Tension Characteristics of High Strength Glass and Carbon Fibre-Reinforced Composite Materials,” Composites Science and Technology, Vol. 68, No. 13, pp. 2770, 2008
15. Wahid, N. Mouhib, A. Kartouni, H. Chakir, and M. ELghorba, “Energy Method for Experimental Life Prediction of Central Core Strand Constituting a Steel Wire Rope,”Engineering Failure Analysis, doi: doi.org/10.1016/j.engfailanal.2018.12.005

[1]	A. Lakshumu Naidu, M. Jaya Krishna, and V. Ram Babu. Evaluation of Mechanical Behaviour of 3D Printed Structures using FDM Process [J]. Int J Performability Eng, 2022, 18(9): 637-643.
[2]	M. S. Yahaya, N. Azis, H. Zainuddin, M. F. Basar, and M. H. Harun. Comparison of Health Index and Degree of Polymerization based on 2-Furfuraldehyde Compound for Transformer Condition Estimation [J]. Int J Performability Eng, 2022, 18(9): 654-659.
[3]	Yu-Lun Chao, Yi-Kuei Lin, and Cheng-Ta Yeh. AMC-Based Algorithm for Network Reliability Evaluation of a Manufacturing System with Scrapping and Rework [J]. Int J Performability Eng, 2022, 18(4): 231-240.
[4]	S. Nallusamy. Material Modeling of Epoxy Granite Composite by Analytical Model and Regression Analysis [J]. Int J Performability Eng, 2021, 17(3): 253-262.
[5]	Kalaivani M, and Kannan R. Reliability Assessment Model for Deterioration Systems Subject to Cumulative Damage [J]. Int J Performability Eng, 2021, 17(12): 981-988.
[6]	Abdul Ghafoor Etemad, Ali Imam Abidi, and Megha Chhabra. Fine-Tuned T5 for Abstractive Summarization [J]. Int J Performability Eng, 2021, 17(10): 900-906.
[7]	Achraf Wahid, Youssef Bassir, Nadia Mouhib, Hamid Chakir, and Mohamed Elghorba. Analytical Approach for Damage Reliability Assessment of Wire Rope [J]. Int J Performability Eng, 2020, 16(8): 1151-1158.
[8]	Fatima Ezzahra Nassih, Achraf Wahid, Fatima Sabah, Hamid Chakir, and Mohamed Elghorba. Reliability Estimation of Acrylonitrile Butadiene Styrene based on Cumulative Damage [J]. Int J Performability Eng, 2020, 16(5): 702-710.
[9]	Xianhong Xu. Heat Conduction Model Optimization Study on the Basis of a Multilayer Decision Variable [J]. Int J Performability Eng, 2020, 16(1): 48-58.
[10]	Ananthakrishnan Kaimal, Bevin Boban Mathew, and S. Jeyanthi. Homogeneous Metal Foam Manufacturing and Impact Test Performance [J]. Int J Performability Eng, 2019, 15(8): 2040-2048.
[11]	Wenzhi Liu, Tianxiang Wang, and Jian Tao. Analysis of Meshing Performance and Fatigue Reliability of Main Reducer Transmission Device for Rail Conveyor [J]. Int J Performability Eng, 2019, 15(7): 1886-1894.
[12]	Achraf Wahid, Nadia Mouhib, Abderrazak Ouardi, Abdelkarim Kartouni, Hamid Chakir, and Mohamed ELghorba. Wire Rope Reliability Assessment based on Damage Mechanics [J]. Int J Performability Eng, 2019, 15(6): 1744-1750.
[13]	Wu Wen, Xiaobo Xue, Ya Li, Peng Gu, and Jianfeng Xu. Code Similarity Detection using AST and Textual Information [J]. Int J Performability Eng, 2019, 15(10): 2683-2691.
[14]	Yanliang Wang, Junfang Xue, Xiufen Zhang, and Lichun Chen. Finite Element Analysis and Evaluation of Bogie Frame for Passenger Locomotive based on Reliability [J]. Int J Performability Eng, 2019, 15(1): 146-155.