1. |
S. Dong, Z. Wu, Y. Pan, H. Su,Y. Liu, “Hidden-Markov-Model-based Asynchronous Filter Design of Nonlinear Markov Jump Systems in Continuous-Time Domain,” IEEE Transactions on Cybernetics, Vol. 49, No. 6, pp. 2294-2304, 2018
|
2. |
L. Wang, Y. Shao,Z. Cao, “Optimal Demodulation Subband Selection for Sun Gear Crack Fault Diagnosis in Planetary Gearbox,”Measurement, Vol. 125, pp. 554-563, 2018
|
3. |
D. Wang, Y. Zhao, C. Yi, K. L. Tsui,J. H. Lin, “Sparsity Guided Empirical Wavelet Transform for Fault Diagnosis of Rolling Element Bearings,”Mechanical Systems and Signal Processing, Vol. 101, pp. 292-308, 2018
|
4. |
W. J. Staszewski, K. Worden,G. R. Tomlinson, “Time-Frequency Analysis in Gearbox Fault Detection using the Wigner-Ville Distribution and Pattern Recognition,”Mechanical Systems and Signal Processing, Vol. 11, pp. 673-692, 1997
|
5. |
Y. Aït-Sahalia and D. Xiu, “Principal Component Analysis of High-Frequency Data,” Journal of the American Statistical Association, Vol. 114, No. 525, pp. 287-303, 2019
|
6. |
R. O.Duda and P. E. Hart, “Pattern Classification and Scene Analysis,” John Wiley and Sons, New York, 1973
|
7. |
R. Q.Yan and R. X. Gao, “Approximate Entropy as a Diagnostic Tool for Machine Health Monitoring,”Mechanical Systems and Signal Processing, Vol. 21, pp. 824-839, 2007
|
8. |
J. B. Yu, “Local and Nonlocal Preserving Projection for Bearing Defect Classification and Performance Assessment,”IEEE Transactions on Industrial Electronics, Vol. 59, pp. 2363-2376, 2012
|
9. |
Y. Wang, G. Xu, L. Liang,K. Jiang, “Detection of Weak Transient Signals based on Wavelet Packet Transform and Manifold Learning for Rolling Element Bearing Fault Diagnosis,”Mechanical Systems and Signal Processing, Vol. 54, pp. 259-276, 2015
|
10. |
X. Ding, Q. Li, L. Lin, Q. He,Y. Shao, “Fast Time-Frequency Manifold Learning and Its Reconstruction for Transient Feature Extraction in Rotating Machinery Fault Diagnosis,”Measurement, Vol. 141, pp. 380-395, 2019
|
11. |
X. Ding, Q. He, Y. Shao,W. Huang, “Transient Feature Extraction based on Time-Frequency Manifold Image Synthesis for Machinery Fault Diagnosis,” IEEE Transactions on Instrumentation and Measurement, Vol. 68, No. 11, pp. 4242-4252, 2019
|
12. |
D. Cai, “Spectral Regression: A Regression Framework for Efficient Regularized Subspace Learning,” Ph.D. Thesis, University of Illinois at Urbana-Champaign, Urbana, IL, USA, 2009
|
13. |
Z. G. Xia, S. X. Xia, L. Wan,S, Y. Cai, “Spectral Regression based Fault Feature Extraction for Bearing Accelerometer Sensor Signals,”Sensors, Vol. 12, pp. 13694-13719, 2012
|
14. |
W. H. Li, T. L. Shi, G. L. Liao,S. Z. Yang, “Feature Extraction and Classification of Gear Faults using Principal Component Analysis,”Journal of Quality in Maintenance Engineering, Vol. 9, pp. 132-143, 2003
|
15. |
P. Tse and D. Atherton, “Prediction of Machine Deterioration using Vibration based Fault Trends and Recurrent Neural Networks,”Journal of Vibration and Acoustics-Transactions of the ASME, Vol. 121, pp. 355-362, 1999
|
16. |
K. Ding, W. Li,X. Zhu, “Practical Technologies for Gear and Gearbox Fault Diagnosis,” China Machine Press, Beijing, August, 2005
|
17. |
K. A. Loparo, et al., “Bearingdata Center, Case Western Reserve University,”(http://csegroups.case.edu/bearingdatacenter/pages/welcome-case-western-reserve-university-bearing-data-center-website, 2009)
|